涵道风扇电机强迫风冷散热结构设计与实验

微特电机 ›› 2024, Vol. 52 ›› Issue (2): 7-13.

涵道风扇电机强迫风冷散热结构设计与实验

俞　浪^1,2,熊俊辉^1,2,陈新民^1,2,陆佳南^1,2,徐　茂^1,2

1. 中国科学院宁波材料技术与工程研究所,宁波 315201; 2. 特种飞行器浙江省工程研究中心,宁波 315201

收稿日期:2023-11-09 出版日期:2024-02-28 发布日期:2024-02-29
基金资助:
宁波市重大攻关项目( 2022Z040)

Design and Test of Forced Air Cooling Structure for Ducted Fan Motor

YU Lang^1,2, XIONG Junhui^1,2, CHEN Xinmin^1,2, LU Jianan^1,2, XU Mao^1,2#br#

1. Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences,Ningbo 315201, China;
2. Special Aircraft Engineering Research Center of Zhejiang Province,Ningbo 315201, China

Received:2023-11-09 Online:2024-02-28 Published:2024-02-29

摘要/Abstract

摘要： 针对涵道风扇电机的轻量化高效散热需求,提出基于涵道风扇内部流场的强迫风冷散热方法,设计了肋片高度为 3 mm、6 mm、9 mm 和 12 mm 的四种风冷散热结构,应用工程估算和 CFD 方法对不同风速下散热效果进行对比分析,搭建实验平台开展地面试验验证。结果表明,在桨毂上增加散热肋片能够有效提高散热效率,壁面温升可降低至无肋片模型的 74%、55%、44%、35%;对于轴向风冷,肋片能显著强化散热,但是存在温度不均的问题。工程估算和 CFD 方法对电机的带肋表面风冷散热分析有较好的精度,可用于涵道风扇电机的温升预示,为涵道风扇推进系统的使用提供依据。根据分析结果提出了高功率密度电机强化散热的研究方向。

关键词: 涵道风扇电推进系统, 高功率密度电机, 强迫风冷散热, 散热结构, 涵道风扇无人机

Abstract: Aiming at the lightweight and efficient heat dissipation requirements of ducted fan motors, a forced air cooling method based on the internal flow field of the ducted fan was proposed. Four kinds of fin air cooling structures with fin heights of 3 mm, 6 mm, 9 mm and 12 mm were designed. The heat dissipation effects under different wind speeds were analyzed using engineering estimation and CFD method, and a test platform was built to perform ground test verification. It showed that the heat dissipation efficiency was greatly enhanced by fin structures arranged on the outside of the hub, and the rise of wall temperature could be reduce to 74%, 55%, 44% and 35% of the finless model. For axial air cooling, fin could significantly enhance heat dissipation, but the temperature distribution in axial direction was uneven. The engineering estimation and CFD method have a good precision for the analysis of the heat dissipation of the ribbed surface of the motor, which can be used to predict the
temperature rise of the ducted fan motor and provide valuable information for the application of ducted fan propulsion system. Further research direction of strengthening heat dissipation for high power density motor was proposed.

Key words: ducted fan propulsion system, high power density motor, forced air cooling, heat-dissipating structure,ducted fan UAV

中图分类号:

TM301

俞　浪, 熊俊辉, 陈新民, 陆佳南, 徐　茂. 涵道风扇电机强迫风冷散热结构设计与实验[J]. 微特电机, 2024, 52(2): 7-13.

YU Lang, XIONG Junhui, CHEN Xinmin, LU Jianan, XU Mao. Design and Test of Forced Air Cooling Structure for Ducted Fan Motor[J]. Small & Special Electrical Machines, 2024, 52(2): 7-13.

[1]	刘方韬, 张成新, 庞悦. 永磁同步电机电磁噪声抑制方法综述[J]. 微特电机, 2024, 52(3): 78-84.
[2]	李世权, 席松涛, 王清德, 李公哲. 新能源清洗车上装异常作业噪声优化[J]. 微特电机, 2024, 52(2): 38-41.
[3]	霍　达, 胡　磊. 越野工况下的新能源汽车用油冷电机设计[J]. 微特电机, 2023, 51(11): 25-29.
[4]	钟成堡, 邓　扬, 崔　中, 卓　明, 耿继青. 漫水式冷却流道结构参数对电主轴温度场的影响[J]. 微特电机, 2023, 51(11): 37-41.
[5]	王海波, 朱艳通, 王永波, 樊玉江, 李传祥, 刘磊磊, 李海鹰. 轻型锂电车电机电池控制器设计[J]. 微特电机, 2023, 51(11): 52-58.
[6]	李志鹏, 钱　华, 陈　辰, 张席铭. 提高电机低温带载性能设计研究[J]. 微特电机, 2023, 51(9): 26-29.
[7]	夏锦涛, 沈艳霞. 基于 LCL 补偿的双频双负载无线电能传输系统[J]. 微特电机, 2023, 51(9): 51-58.
[8]	李　洵 , 卫　薇 , 舒　彧 , 赵文彬 . 基于改进双目视觉和掩膜区域卷积神经网络的空间定位方法研究[J]. 微特电机, 2023, 51(8): 67-.
[9]	李萍, 王朝建, 张宝玉, 钱凯. 车载激光雷达NVH特性仿真分析及优化[J]. 微特电机, 2023, 51(7): 25-30.
[10]	陈登峰, 宋君峰, 位超群. 碳化硅电驱动总成设计与测试[J]. 微特电机, 2022, 50(12): 27-30.
[11]	张银龙, 陈浩, 李华峰. 基于CANOpen的变形机翼控制系统研究[J]. 微特电机, 2022, 50(12): 43-46.
[12]	黄金旺, 梁卓, 李海平, 李奕慈, 黄元毅. 基于边频的发电机啸叫分析与控制[J]. 微特电机, 2022, 50(4): 7-11.
[13]	张琦, 陈彬, 贾金信, 郭长光. 汽车控制器散热水道的优化改进[J]. 微特电机, 2022, 50(4): 12-14.
[14]	李孟, 闫波, 周育茹, 田磊. 航空用油冷电机流场研究与仿真[J]. 微特电机, 2022, 50(3): 31-34.
[15]	丁杰,尹亮. 低地板车辆永磁电机的电磁噪声优化研究[J]. 微特电机, 2022, 50(1): 7-14.