新材料对外转子永磁同步电机输出特性影响分析

微特电机 ›› 2021, Vol. 49 ›› Issue (12): 29-34.

新材料对外转子永磁同步电机输出特性影响分析

赵元胜, 唐德佳, 潘卫东, 何洋, 赵睿

上海航天控制技术研究所,上海 201109

收稿日期:2021-08-31 出版日期:2021-12-28 发布日期:2021-12-30
作者简介:赵元胜(1995—),男,硕士研究生,助理工程师,研究方向为伺服电机本体设计及其控制技术。

Analysis of the Influence of New Materials on the Output Characteristic of Permanent Magnet Synehionous Motor with External RotorERPMSM

ZHAO Yuan-sheng, TANG De-jia, PAN Wei-dong, HE Yang, ZHAO Rui

Shanghai Aerospace Control Technology Institute, Shanghai 201109, China

Received:2021-08-31 Online:2021-12-28 Published:2021-12-30

摘要/Abstract

摘要： 定子铁心材料对永磁同步电机性能的影响至关重要,随着对铁磁材料研究的不断深入,涌现出了一大批诸如1J22、非晶合金等新型材料。借助于ANSYS仿真软件,研究了结构参数对外转子永磁同步电机性能的影响,并以设计的电机参数为基础,研究新材料对转矩密度、功率密度、效率等方面的影响,给出了各种材料的应用场合,为定子铁心材料的选择提供依据。研制了一台样机并进行初步实验,验证了该设计的合理性。

关键词: 外转子永磁同步电机, 1J22, 非晶合金, 电磁特性, 有限元分析

Abstract: The influence of stator core materials on the characteristic of PMSM is very important. With the deepening research on ferromagnetic materials, a large number of new materials such as 1J22 and amorphous alloys have emerged. Using the ANSYS simulation software, the influence of structural parameters on the performance ofpermanent magnet synchronous motor with external rotor(ERPMSM) was studied. Based on the designed parameters, the influence of new materials on torque density, power density and efficiency was studied. And a basis for the selection of stator core materials was provided. An ERPMSM was developed and the experimental results verified the correctness of the design.

Key words: permanent magnet synchronous motor with external rotor(ERPMSM), 1J22, amorphous alloy, electromagnetic characteristic, finite element analysis

中图分类号:

TM351

赵元胜, 唐德佳, 潘卫东, 何洋, 赵睿. 新材料对外转子永磁同步电机输出特性影响分析[J]. 微特电机, 2021, 49(12): 29-34.

ZHAO Yuan-sheng, TANG De-jia, PAN Wei-dong, HE Yang, ZHAO Rui. Analysis of the Influence of New Materials on the Output Characteristic of Permanent Magnet Synehionous Motor with External RotorERPMSM[J]. Small & Special Electrical Machines, 2021, 49(12): 29-34.

参考文献 17

[1]	陈凤贵,陈光明,刘克华.临近空间环境及其影响分析[J].装备环境工程,2013,10(4):71-85.
[2]	时圣波,唐硕,梁斌.临近空间飞行器防隔热/承载一体化热结构设计及力/热行为[J].装备环境工程,2020,17(4):36-42.
[3]	何苹,王莹莹,樊雷.临近空间高超声速飞行器红外辐射特性分析[J].红外技术,2019,41(12):1175-1180.
[4]	唐任远.现代永磁电机[M].北京:机械工业出版社,2015.
[5]	唐任远.稀土永磁电机的关键技术与高性能电机开发[J].沈阳工业大学学报,2005,27(2):162-170.
[6]	MECROW B C,BENNETT J W,JACK A G.Drive topologies for solar-powered aircraft [J].IEEE Transactions on Industrial Electronics,2010,57(1):457-464.
[7]	GOEL A,RAJPUT V,BAJAJ S.Solar hybrid electric vehicle for future impulse [C]//2016 3rd International Conference on Computing for Sustainable Global Development,2016:2794-2800.
[8]	HILL-COTTINGHAM R J,COLES P C,EASTHAM J F. Plastic structure multi-disc axial flux PM motor [C]// Conference Record of the 2002 Industry Applications Conference, Pittsburgh,USA,2002:1274-1280.
[9]	王晓远,高鹏,赵玉双.电动汽车用高功率密度电机关键技术[J].电工技术学报,2015,30(6):53-59.
[10]	李立毅,张江鹏,闫海媛,等.高过载永磁同步电机的电磁特性[J].电工技术学报,2017,32(2):125-134.
[11]	张江鹏.高空飞行器用高效率高功率密度永磁同步电机研究[D].哈尔滨:哈尔滨工业大学,2018:20-25.
[12]	LU K,RASMUSSEN P O,RITCHIE E.Design considerations of permanent magnet transverse flux machines [J].IEEE Transactions on Magnetics,2011,47(10):2804-2807.
[13]	寇宝泉,杨小宝,罗俊,等.横向磁场磁通反向电机的特性分析[J].电工技术学报,2017,32(S2):18-25.
[14]	秦伟,范瑜,徐洪泽,等.高温超导运动磁场电磁Halbach 初级结构直线感应磁悬浮电机[J].电工技术学报,2018,33(23):5427-5434.
[15]	王勇,王超,张云环,等.基于双磁钢转子的大力矩飞轮用电机设计[J].飞控与探测,2018,1(1):82-86.
[16]	刘广琦.集中绕组PMSM 槽/极数组合规律分析[J].微电机,2013,46(2):20-23.
[17]	殷明,王森,陶侃凯,等.双圈磁钢飞轮电机的设计及优化[J].飞控与探测,2020,3(2):75-80.