轴向磁通永磁电机冷却结构设计与温度场分析

微特电机 ›› 2024, Vol. 52 ›› Issue (8): 8-13.

轴向磁通永磁电机冷却结构设计与温度场分析

金臻协¹,田艳丰¹,付长涛²

1. 沈阳工业大学电气工程学院,沈阳 110870; 2. 辽宁航天凌河汽车有限公司,沈阳 100076

收稿日期:2024-01-05 出版日期:2024-08-28 发布日期:2024-09-30

Cooling Structure Design and Temperature Field Analysis of Axial Flux Permanent Magnet Motor

JIN Zhenxie¹, TIAN Yanfeng¹, FU Changtao²

1. College of Electrical Engineering, Shenyang University of Technology,Shenyang 110870, China;
2. Liaoning Aerospace Linghe Automobile Co. , Ltd. ,Shenyang 100076, China

Received:2024-01-05 Online:2024-08-28 Published:2024-09-30

摘要/Abstract

摘要： 为解决轴向磁通永磁电机散热难题,通过降低永磁体涡流损耗并采用水冷方式来限制电机温升。以一台 25 kW、3 000 r / min 轴向磁通永磁电机为研究对象,分析永磁体分块对永磁体涡流的影响,确定永磁体分 5 段为综合最佳方案。设计两种水冷结构,分别是轴向内外螺旋水道和轴向内外 U 形水道。通过建立电机温度场分析模型,进行流固耦合的仿真计算,对比两种水冷结构的冷却效果,结果表明,U 形结构冷却效果优于螺旋结构。

关键词: 轴向磁通永磁电机, 水冷结构, 电机温升, 温度场

Abstract: In order to solve the problem of heat dissipation of axial flux permanent magnet motor, the temperature rise of the motors was limited by reducing the eddy current loss of the permanent magnets and using the water cooling method. A 25 kW, 3 000 r / min axial flux permanent magnet motor was taken as the research object to analyze the impact of permanent magnet block segmentation on permanent magnet eddy currents, and the permanent magnet was determined to be divided into five stages as the best comprehensive scheme. Two water-cooled structures were designed, namely the axial inner and outer spiral channels and the axial inner and outer U-shaped channels. By establishing the temperature field analysis model of the motor and the simulation calculation of fluid-structure interaction, the cooling effect of the two cooling structures was compared, and the results showed that the cooling effect of the U-shaped structure was better than that of the spiral structure.

Key words: axial flux permanent magnet(AFPM) motor, water-cooled structure, motor temperature rise, temperature field

中图分类号:

TM351

金臻协 , 田艳丰 , 付长涛. 轴向磁通永磁电机冷却结构设计与温度场分析[J]. 微特电机, 2024, 52(8): 8-13.

JIN Zhenxie , TIAN Yanfeng , FU Changtao. Cooling Structure Design and Temperature Field Analysis of Axial Flux Permanent Magnet Motor[J]. Small & Special Electrical Machines, 2024, 52(8): 8-13.

[1]	崔效源, 赵国新, 张　鹏, 赵欣媛. 新型双电容三相感应电机单相运行定子三维温度场研究[J]. 微特电机, 2024, 52(9): 6-11.
[2]	付雅军, 王有军. 永磁同步电机温度场分析与优化研究[J]. 微特电机, 2024, 52(7): 36-39.
[3]	赵浩然, 吴胜男. 交错磁极混合励磁同步发电机冷却系统设计与温度场计算[J]. 微特电机, 2024, 52(6): 8-12.
[4]	张亚欣, 简晓书, 吴和远, 朱志能, 班解进. 宇航步进电机多工况温度场仿真与试验研究[J]. 微特电机, 2024, 52(5): 13-17.
[5]	刘慧娟, 刘广冬, 易元元. 无磁轭分块电枢盘式电机齿槽转矩优化设计[J]. 微特电机, 2024, 52(4): 1-7.
[6]	姜明盛, 张志锋, 武岳, 赵国新. 轴向磁通永磁电机混合冷却结构设计与分析[J]. 微特电机, 2024, 52(3): 11-15.
[7]	程文杰, 朱宇明, 肖玲, 李明. 高速轴向磁通永磁电机环形绕组电感计算[J]. 微特电机, 2023, 51(4): 26-31.
[8]	王斗勇, 彭　兵. 无铁心轴向磁通永磁电机的磁场解析计算[J]. 微特电机, 2023, 51(12): 7-13.
[9]	张　原, 佟文明. 高频轴向磁通永磁电机交流铜耗解析计算[J]. 微特电机, 2023, 51(11): 15-20.
[10]	钟成堡, 邓　扬, 崔　中, 卓　明, 耿继青. 漫水式冷却流道结构参数对电主轴温度场的影响[J]. 微特电机, 2023, 51(11): 37-41.
[11]	汪晓强, 佟文明. 高速永磁电机流固混合冷却结构流固耦合分析[J]. 微特电机, 2023, 51(10): 1-5.
[12]	许海波, 胡岩, 刘泽宇, 曹力. 基于流固耦合的高速永磁电机多物理场仿真分析[J]. 微特电机, 2022, 50(5): 22-26.
[13]	蒋燕飞,黄涛,周晓东,宁远涛,张延顺,陈琦. 降低真空环境高速永磁电机温升的设计方法[J]. 微特电机, 2022, 50(1): 23-26.
[14]	陈辰, 钱华, 李志鹏, 秦倩倩, 杨可新. 真空环境用有刷直流电机三维瞬态温度场的计算与分析[J]. 微特电机, 2021, 49(6): 34-37.
[15]	李艳凯, 郭振兴, 张清艺, 彭兵. 轴向磁通与径向磁通永磁同步电机性能对比[J]. 微特电机, 2021, 49(12): 8-13.