串联式齿轮传动大量程角位移传感器设计

微特电机 ›› 2024, Vol. 52 ›› Issue (6): 13-16.

串联式齿轮传动大量程角位移传感器设计

白　鸽¹,彭春增¹,翟志豪²,葛　闯¹,效　益¹

1. 苏州长风航空电子有限公司,苏州 215151; 2. 空军装备部驻苏州地区军事代表室,苏州 215151

收稿日期:2024-04-18 出版日期:2024-06-28 发布日期:2024-06-27

Design of Large Range Angular Position Sensor Based on Series Gear Transmission

BAI Ge ¹ , PENG Chunzeng ¹ , ZHAI Zhihao ² , GE Chuang¹, XIAO Yi¹#br#

1. Suzhou Changfeng Avionics Co. ,Ltd. ,Suzhou 215151,China; 2. Military Representative Office of Air Force Equipment Department in Suzhou,Suzhou 215151,China

Received:2024-04-18 Online:2024-06-28 Published:2024-06-27

摘要/Abstract

摘要： 旋转差动变压器式角位移传感器在机载领域具有广泛的应用,采用齿轮传动的方式可实现其量程的扩展。分析了传统并联式齿轮传动结构存在的不足,设计了串联式的齿轮传动结构。该结构相比于并联式具有结构紧凑、质量轻、成本低等优点。采用该串联式方案研制出了某型航空发动机双余度喷口角位移传感器,进行环境试验前、后的产品性能测试及产品质量测量。测试结果表明,传感器内部齿轮传动机构可实现角度的准确、可靠传递。串联式齿轮传动传感器在-65° ~ 65°范围内具有优异的输出特性,与并联式齿轮传动结构的传感器相比,约减重 32%。

关键词: 串联式, 齿轮传动, 大量程, 角位移传感器, 结构设计

Abstract: Rotary differential transformer type angular position sensors are widely used in the field of airborne applications. Their range can be extended by gear transmission. The shortcomings of the traditional parallel gear transmission structure were analyzed, and the series gear transmission structure was designed. Compared to the parallel type, series structure has the advantages of compact structure, light weight and low cost. A dual redundant nozzle angular position sensor for a certain type of aircraft engine was developed using the series scheme. Its performance was tested before and after environmental testing, and the weight of the product was measured. The test results showed that the angle could be accurately and reliably transmitted by the internal gear transmission mechanism. Within the range of - 65° ~ 65° , the sensor with series gear transmission had excellent output characteristics, and the weight of the sensor was reduced by 32% compared with the parallel gear transmission structure.

Key words: series structure, gear transmission, large range, angular position sensor, structure design

中图分类号:

TM383. 2

白　鸽 , 彭春增 , 翟志豪 , 葛　闯 , 效　益. 串联式齿轮传动大量程角位移传感器设计[J]. 微特电机, 2024, 52(6): 13-16.

BAI Ge , PENG Chunzeng, ZHAI Zhihao , GE Chuang, XIAO Yi. Design of Large Range Angular Position Sensor Based on Series Gear Transmission[J]. Small & Special Electrical Machines, 2024, 52(6): 13-16.

[1]	任双华, 张艳丽, 倪卫东. 一种大量程三极 RVDT 的设计与仿真[J]. 微特电机, 2023, 51(9): 30-33.
[2]	单鹏飞, 王汉丰, 方晓强, 杨素香. 抗强冲击微型圆筒型直线电机的结构设计[J]. 微特电机, 2022, 50(10): 24-27.
[3]	薛晓川,王志强,李树胜. 电励磁同极电机控制实验研究[J]. 微特电机, 2019, 47(3): 57-60.