微特电机 ›› 2023, Vol. 51 ›› Issue (5): 1-6.

• 理论研究 •    下一篇

自由活塞内燃发电机用直线电机的优化与实验研究

王金龙1, 鲁述豪1, 张宸2, 肖进1, 黄震1   

  1. 1.上海交通大学 机械与动力工程学院,上海 200240;
    2.上海交通大学 智慧能源创新学院,上海 200240
  • 收稿日期:2023-02-13 出版日期:2023-05-28 发布日期:2023-05-29
  • 作者简介:王金龙(1988—),男,博士研究生,研究方向为自由活塞内燃发电机设计。
  • 基金资助:
    上海市科委高新技术领域项目(19511108500)

Design and Experimental Study of Linear Motor for the Free Piston Engine Generator

WANG Jinlong1, LU Shuhao1, ZHANG Chen2, XIAO Jin1, HUANG Zhen1   

  1. 1. School of Mechanical Engineering, Shanghai Jiaotong University,Shanghai 200240, China;
    2. College of Smart Energy, Shanghai Jiaotong University,Shanghai 200240, China
  • Received:2023-02-13 Online:2023-05-28 Published:2023-05-29

摘要: 基于电机有限元仿真模型和多目标遗传算法(MOGA)优化设计了圆筒型无槽永磁直线电机的关键结构参数,分析了优化设计后的直线电机在空载状态、电动状态以及发电状态下的输出性能。通过在电机两端安装侧板的方法优化了直线电机的定位力,定位力有效值从22.36 N降为2.19 N,减小了90%。根据优化结果研制了试验机并进行了相关参数的实验测试,仿真结果与实验结果吻合良好,验证了该圆筒型无槽永磁直线电机经有限元电磁仿真设计及优化方案的可行性。

关键词: 自由活塞内燃发电机, 直线电机, 多目标遗传算法, 定位力

Abstract: Based on the finite element simulation model of the motor and the multi-objective genetic algorithm (MOGA), the key structural parameters of the tubular slotless permanent magnet linear motor were designed and optimized, and theoutput performance of the optimized linear motor in the no-load state, electric state and power generation state was analyzed. The cogging force of the linear motor was optimized by installing side plates at both ends of the motor. The effective value of the cogging force was reduced from 22.36 N to 2.19 N, which was reduced by90%. A prototype was developed and tested. The simulation results were in good agreement with the experimental results, which verify the feasibility of the tubular slotless permanent magnet linear motor through the finite element electromagnetic simulation design and optimization scheme.

Key words: free piston engine generator(FPEG), linear motor, multi-objective genetic algorithm(MOGA), cogging force

中图分类号: