定子无铁心轴向磁通永磁电机的绕组损耗与效率研究

微特电机 ›› 2023, Vol. 51 ›› Issue (2): 1-7.

• 理论研究 • 下一篇

定子无铁心轴向磁通永磁电机的绕组损耗与效率研究

魏国, 王率军, 雷晗, 李绍民, 周欣沂

西南技术物理研究所,成都 610041

收稿日期:2022-10-17 出版日期:2023-02-28 发布日期:2023-03-01
作者简介:魏国(1986—),男,硕士,工程师,主要研究方向为系统总体结构。

Winding Loss and Efficiency of Stator Coreless Axial Flux Permanent Magnet Motor

WEI Guo, WANG Shuaijun, LEI Han, LI Shaomin, ZHOU Xinyi

Southwest Institute of Technical Physics, Chengdu 610041,China

Received:2022-10-17 Online:2023-02-28 Published:2023-03-01

摘要/Abstract

摘要： 定子无铁心轴向磁通永磁电机没有定子铁心,具有输出转矩平稳、质量轻、装配简单等优势,但同时也存在绕组涡流损耗大的问题。基于利兹线绕组,对定子无铁心轴向磁通电机的绕组涡流损耗进行了分析,给出了绕组涡流损耗计算的解析公式与有限元结合的非均匀分层混合计算模型,并通过简化的全绕组三维有限元模型,验证了混合计算模型的正确性和有效性。研究了以电机效率最大化为目标的利兹线规格选型方法。由于利兹线的实际制造工艺的问题,对电机效率进行了计算和分析,并给出了利兹线选型相关的定性结论。

关键词: 轴向磁通电机, 定子无铁心, 绕组涡流损耗, 利兹线

Abstract: Coreless axial flux permanent magnet motor has the advantages of stable output torque, reduced weight and simpler assembly due to the removal of stator core, but it also has the problem of large winding eddy current loss.The loss of stator coreless axial flux motor which used Litz wire to reduce the winding eddy current loss was analyzed. A hybrid calculation model ofLitz wire winding eddy current loss calculation which used analytical formula based on finite element was given. A simplified 3D finite element model of full winding was established and the correctness of the hybrid calculation model was verified.The selection method of Litz wire that aimed at maximizing the efficiency of motor was studied. After deriving the expression of motor efficiency, some qualitative conclusions related to the selection of Litz wire were given due to the actual manufacturing process of Litz wire.

Key words: axial flux motor, stator coreless, winding eddy current loss, Litz wire

中图分类号:

TM351

魏国, 王率军, 雷晗, 李绍民, 周欣沂. 定子无铁心轴向磁通永磁电机的绕组损耗与效率研究[J]. 微特电机, 2023, 51(2): 1-7.

WEI Guo, WANG Shuaijun, LEI Han, LI Shaomin, ZHOU Xinyi. Winding Loss and Efficiency of Stator Coreless Axial Flux Permanent Magnet Motor[J]. Small & Special Electrical Machines, 2023, 51(2): 1-7.

参考文献

[1] CAMPBELL P.The magnetic circuit of an axial field D.C.electrical machine[J].IEEE Transactions on Magnetics,1975,11(5):1541-1543.
[2] GIERAS J F,WANG R J,KAMPER M.Axial flux permanent magnet brushless machines[M].New York:Springer Verlag,2008.
[3] CAVAGNINO A,LAZZARI M,PROFUMO F,et al.A comparison between the axial flux and the radial flux structures for PM synchronous motors[J].IEEE Transactions on Industrial Applications,2002,38(6):1517-1524.
[4] CHEN A,NILSSEN R,NYSVEEN A.Performance comparisons among radial-flux,multistage axial-flux and three-phase transverse-flux PM machines for downhole applications[J].IEEE Transactions on Industrial Applications,2010,46(2):779-789.
[5] AYDIN M,GULEC M.A new coreless axial flux interior permanent magnet synchronous motor with sinusoidal rotor segments[J].IEEE Transactions on Magnetics,2016,52(7):1-4.
[6] ALAMDAR YAZDI M,SAIED S A,MIRIMANI S M.Design and construction of new axial-flux permanent magnet motor[J].IET Electric Power Applications,2020,14(12):2389-2394.
[7] PLATT D.Permanent magnet synchronous motor with axial flux geometry[J].IEEE Transactions on Magnetics,1989,25(4):3076-3079.
[8] SUBORICS I,GAMMRTER C,TUYSYZ A,et al.Weight optimisation of coreless axial-flux permanent magnet machines[J].IET Electric Power Applications,2018,13(5):594-603.
[9] MAHMOUDI A,KAHOURZADE S,RAHIM N A,et al.Design,analysis,and prototyping of an axial-flux permanent magnet motor based on genetic algorithm and finite-element analysis[J].IEEE Transactions on Magnetics,2013,49(4):1479-1492.
[10] 徐衍亮,赵建辉,房建成.高速储能飞轮用无铁心永磁无刷直流电动机的分析与设计[J].电工技术学报,2004,19(12):24-28.
[11] PARVIAINEN A.Design of axial-flux permanent-magnet low-speed machines and performance comparison between radial-flux and axial-flux machines[M].Lappeenranta:Lappeenrannan Teknillinen Yliopisto,2005.
[12] RALLABANDI V,TARAN N,IONEL D M,et al.Coreless multidisc axial flux PM machine with carbon nanotube windings[J].IEEE Transactions on Magnetics,2017,53(6):1-4.
[13] DAGHIGH A,JAVADI H,TORKAMAN H.Design optimization of direct-coupled ironless axial flux permanent magnet synchronous wind generator with low cost and high annual energy yield[J].IEEE Transactions on Magnetics,2016,52(9):1-11.
[14] GENG W,ZHANG Z.Analysis and implementation of new ironless stator axial-flux permanent magnet machine with concentrated non-overlapping windings[J].IEEE Transactions on Energy Conversion,2018,33(3):1274-1284.
[15] 邵非非,陈钢.无刷直流盘式电机涡流计算[J].微电机,2011,44(10):13-16.
[16] WANG R J,KAMPER M J.Calculation of eddy current loss in axial field permanent-magnet machine with coreless stator[J].IEEE Transactions on Energy Conversion,2004,19(3):532-538.
[17] 高华敏,张卓然,王晨,等.定子无铁心轴向磁场永磁轮毂电机损耗分析及效率优化[J].中国电机工程学报,2021,41(6):2002-2012.
[18] 陈晨,王又珑.基于效率及温升的轴向磁通永磁电机优化设计[J].中国电机工程学报,2016,36(6):1686-1694,1782.

定子无铁心轴向磁通永磁电机的绕组损耗与效率研究

Winding Loss and Efficiency of Stator Coreless Axial Flux Permanent Magnet Motor

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

联系我们

[1]	刘慧娟, 周佳明, 易元元, 宋腾飞. 永磁同步电机拓扑结构对散热性能的影响[J]. 微特电机, 2023, 51(2): 13-19.
[2]	胡文韬, 李华, 郑东, 华春蓉, 沈思思. 基于神经网络和粒子群算法的永磁同步电机运行与振动性能优化[J]. 微特电机, 2023, 51(2): 26-30.
[3]	王雅哲, 马其华. 基于JMAG与modeFRONTIER的车用永磁同步电机多目标优化[J]. 微特电机, 2023, 51(2): 31-37.
[4]	马超群, 张志锋. 基于谐波电流抑制的双三相PMSM容错型直接转矩控制[J]. 微特电机, 2023, 51(2): 38-45.
[5]	蔡斌军, 李朝旗, 何雍, 王田宇. 基于Fuzzy-PI的直驱永磁风力发电系统MPPT控制[J]. 微特电机, 2023, 51(2): 51-55.
[6]	杨伟涛, 吴凤海. 永磁电机转子磁性能在线检测方法及应用[J]. 微特电机, 2023, 51(2): 68-70.
[7]	周晓燕, 李德鑫, 刘广信. 悬浮载荷对无轴承永磁电机电磁力波及电磁噪声影响分析[J]. 微特电机, 2022, 50(12): 8-15.
[8]	刘柯, 周羽, 杨小宝, 罗波. 高速永磁同步电机结构对转子涡流损耗影响[J]. 微特电机, 2022, 50(12): 16-20.
[9]	龚乘龙, 莫德云. 汽车座椅泵电机的噪声分析与优化[J]. 微特电机, 2022, 50(12): 21-26.
[10]	姜泽超, 朱蕴璞, 孙乐, 高鹏. 基于三电平逆变器和模型预测的电机控制方法[J]. 微特电机, 2022, 50(12): 34-42.
[11]	徐殿胜, 张志锋. 改进的永磁同步电机模型预测控制策略[J]. 微特电机, 2022, 50(12): 53-58.
[12]	陈商玥, 高强, 陈愚. 永磁同步电机双矢量无权重模型预测转矩控制[J]. 微特电机, 2022, 50(11): 46-51.
[13]	欧阳湘军, 赵明威, 谭平, 黄胜平, 张硕. 一种鲁棒性的永磁同步电机单电流传感器相电流重构方法[J]. 微特电机, 2022, 50(10): 9-14.
[14]	杨荣江, 戴志立, 吴林泉. 风冷低噪大功率永磁同步电机设计与仿真[J]. 微特电机, 2022, 50(10): 15-19.
[15]	周金华, 李泽世, 吴佳浩. 电磁失电制动器优化设计与仿真[J]. 微特电机, 2022, 50(10): 28-30.