基于SMA新型旋转微驱动器的设计研究

doi:1004-7018-46-4-41-44

微特电机 ›› 2018, Vol. 46 ›› Issue (4): 41-44.doi: 1004-7018-46-4-41-44

基于SMA新型旋转微驱动器的设计研究

柴宗兴,许立忠,曹富林

燕山大学,秦皇岛 066004

收稿日期:2017-01-18 出版日期:2018-04-28 发布日期:2018-04-28
作者简介:柴宗兴(1992—),男,硕士研究生,主要研究方向为机电集成SMA活齿传动系统。
基金资助:
2017学年燕山大学硕士研究生创新资助项目(2017XJSS012)

Design and Research of a New Type of Rotary Micro-Actuator Based on Shape Memory Alloys

CHAI Zong-xing, XU Li-zhong, CAO Fu-lin

Yanshan University,Qinhuangdao 066004,China

Received:2017-01-18 Online:2018-04-28 Published:2018-04-28

摘要/Abstract

摘要：

研究了一种基于形状记忆合金(SMA)为驱动材料的新型旋转微驱动器,利用活齿传动把SMA丝的直线驱动转化为旋转驱动。该驱动器具有结构紧凑、抗磁干扰和低转速等优点。介绍了它的基本结构和工作原理,通过对SMA驱动和活齿传动的分析,得到了驱动器转速和转矩随输出轴转角的变化规律,为该样机理论研究和试验研究奠定了基础。

关键词: 形状记忆合金(SMA), 活齿传动, 微驱动器

Abstract:

A new type of rotary micro-actuator based on shape memory alloy (SMA) was studied, which was used to drive the linear drive of SMA wire into rotary drive. The driver has the advantages of compact structure, anti-electromagnetic interference, low speed and so on . The introduction of the basic structure and working principle, through the analysis of the SMA drive and the oscillating tooth drive, the drive speed and torque variation with output shaft rotation, which laid the foundation for the research and test on the prototype theory.

Key words: shape memory alloy(SMA), movable teeth transmission, micro-actuator

中图分类号:

TM384

柴宗兴, 许立忠, 曹富林. 基于SMA新型旋转微驱动器的设计研究[J]. 微特电机, 2018, 46(4): 41-44.

CHAI Zong-xing, XU Li-zhong, CAO Fu-lin. Design and Research of a New Type of Rotary Micro-Actuator Based on Shape Memory Alloys[J]. Small & Special Electrical Machines, 2018, 46(4): 41-44.

参考文献

[1]	CHANG L C, READ T A . Plastic deformation and diffusionless phase changes in metals-the gold-cadmium beta phase[J]. Journal of Metals, 1951,3(1):47-52.
[2]	BAROOAH P, REY N . Closed-loop control of a shape memory alloy actuation system for variable area fan nozzle[J]. Proceedings of SPIE-The International Society for Optical Engineering, 2002,4693:384-395.
[3]	REY N M, MILLER R M, TILLMAN T G , et al. Variable area nozzle for gas turbine engines driven by shape memory alloy actuators:US,US6318070[P]. 2001.
[4]	REY N, TILLMAN G, MILLER R M , et al. Shape memory alloy actuation for a variable area fan nozzle[J]. Proceedings of SPIE-The International Society for Optical Engineering, 2001,4332:371-382.
[5]	GAISSERT N, MUGRAUER R, MUGRAUER G , et al. Towards Autonomous Robotic Systems[M]. Berlin:Springer, 2014: 90-100.
[6]	YUK H, KIM D, LEE H , et al. Shape memory alloy-based small crawling robots inspired by C.elegans.[J]. Bioinspiration & Biomimetics, 2011,6(4):1001-1004.
[7]	KIM B, LEE M G, LEE Y P , et al. An earthworm-like micro robot using shape memory alloy actuator[J]. Sensors & Actuators A Physical, 2006,125(2):429-437.
[8]	胡冰山, 吴明晖, 付庄 , 等. 差动式形状记忆合金驱动器驱动的仿生吸盘[J].华中科技大学学报:自然科学版, 2010(7):16-19.
[9]	刘颖, 闫晓军 . 一种低速连续旋转SMA电机的设计与试验[J]. 航空动力学报, 2010,25(9):2023-2029.
[10]	吴佳俊, 王帮峰, 芦吉云 , 等. 一种形状记忆合金扭转驱动器的制备与测试[J].中国机械工程, 2014(12):1591-1594.
[11]	BRINSON L C . One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variable[J]. Journal of Intelligent Material Systems & Structures, 1993,4(2):729-742.
[12]	杨杰, 吴月华 . 形状记忆合金及其应用[M]. 合肥: 中国科学技术大学出版社, 1993: 109.
[13]	柴宗兴, 许立忠 . 机电集成形状记忆合金活齿传动装置受力分析[J]. 中国机械工程, 2017,28(19).
[14]	李怀勇 . 新型杆式压电电机研究[D]. 秦皇岛:燕山大学, 2013.
[15]	李剑锋, 曲继方 . 波齿传动啮合状态几何模型的建立及其应用[J]. 兰州理工大学学报, 1989 ( 3):26-33.
[16]	丁肇棣, 曲继方 . 波齿传动的受力分析和效率计算[J].燕山大学学报, 1988(2):31-35.

基于SMA新型旋转微驱动器的设计研究

Design and Research of a New Type of Rotary Micro-Actuator Based on Shape Memory Alloys

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价

联系我们