微特电机 ›› 2018, Vol. 46 ›› Issue (4): 11-15.doi: 1004-7018-46-4-11-15

• 设计分析 • 上一篇    下一篇

半闭口槽平行充磁永磁电机全局解析法优化设计

景弋洋,章跃进   

  1. 上海大学,上海 200072
  • 收稿日期:2016-10-08 出版日期:2018-04-28 发布日期:2018-04-28

Exact Analytical Method and Optimization Design for Parallel Magnetization Permanent-Magnet Motors With Semi-Closed Slots

JING Yi-yang, ZHANG Yue-jin   

  1. Shanghai University, Shanghai 200072, China
  • Received:2016-10-08 Online:2018-04-28 Published:2018-04-28

摘要:

建立了半闭口槽平行充磁表贴式永磁电机全局解析模型。求解子域分别为永磁、气隙、槽口和槽身。利用边界条件和分界条件,求解极坐标系下各子域的二维拉普拉斯方程或泊松方程。解析计算结果与二维有限元法计算结果较为一致;反电势计算波形和实验波形也较吻合。将验证正确的全局解析法和遗传算法结合,进行电机空载性能优化。结果显示电机电势波形更接近正弦、齿槽定位转矩减小,证明了模型和方法的合理有效性。

关键词: 平行充磁表贴式永磁电机, 半闭口槽, 解析法, 气隙磁密, 齿槽转矩, 反电动势, 遗传算法

Abstract:

An analytical subdomain model was presented to compute the magnetic field distribution in semi-closed slots parallel magnetization surface mount PM brushless motor. Solving subdomains were permanent magnet, air gap, slot and groove. The boundary conditions were used to solve the two-dimensional Laplace equation or Poisson equation of each sub-domain in the polar coordinate system. The analytical results were in good agreement with the results obtained by the two-dimensional finite element method. Compared with the experimental waveforms, the back EMF calculation waveforms were in good agreement with that. The correct global analytical method was combined with genetic algorithm, and then the motor no-load performance was optimised. The results showed that the motor potential waveform was more sinusoidal and the cogging torque was reduced, which proved the validity of the model and provided method.

Key words: parallel magnetization PM motor, semi-closed slots, exact analytical method, air-gap magnetic, cogging torque, back-EMF, genetic algorithm

中图分类号: