微特电机 ›› 2022, Vol. 50 ›› Issue (3): 60-66.doi: 1004-7018(2022)03-0005-12

• 综述 • 上一篇    

永磁同步电机模型预测转矩控制综述

徐殿胜, 张志锋   

  1. 沈阳工业大学 电气工程学院,沈阳 110870
  • 收稿日期:2021-11-08 出版日期:2022-03-21 发布日期:2022-03-21
  • 作者简介:徐殿胜(1997—),男,硕士研究生,研究方向为永磁同步电机控制。 张志锋(1981—),男,教授,博士,主要从事现代电机控制技术、多相电机控制、电动汽车电驱动控制系统等方面的研究。
  • 基金资助:
    国家自然科学基金面上项目(51877139)

Review on Model Predictive Torque Control of Permanent Magnet Synchronous Motor

XU Diansheng, ZHANG Zhifeng   

  1. School of Electrical Engineering, Shenyang University of Technology,Shenyang 110870,China
  • Received:2021-11-08 Online:2022-03-21 Published:2022-03-21

摘要: 与传统控制方式相比,永磁同步电机(PMSM)模型预测控制(MPC)可以达到更好的控制效果,控制效果直接决定了整个电机驱动系统的性能。针对PMSM的MPC发展过程进行梳理,主要对单矢量、双矢量以及三矢量的模型预测转矩控制(MPTC)控制方法进行了分析和比较,并讨论了存在的问题以及未来发展方向。

关键词: 永磁同步电机, 模型预测转矩控制, 单矢量, 双矢量, 三矢量, 占空比, 虚拟矢量, 共模电压

Abstract: Compared with traditional control methods, model predictive control (MPC) of permanent magnet synchronous motor (PMSM) can achieve better control effect, and the control effect directly determines the performance of the whole motor drive system.The development process of PMSM MPC was combed,the control methods of single vector, double vector and three vector model predictive torque control (MPTC) were mainly analyzed and compared,and the existing problems and future development direction were discussed.

Key words: permanent magnet synchronous motor(PMSM), model predictive torque control, single-vector, double-vector, three-vector, duty ratio, virtual vector, common mode voltage(CMV)

中图分类号: