[1] | KIM H LORENZ R D. , Carrier signal injection based sensorless control methods for IPM synchronous machine drives[C]//IEEE IAS Annual Meeting, 2004: 977-984. | [2] | BOLOGNANI S, CALLIGARO S, PETRELLA R , et al.Sensorless control of IPM motors in the low-speed range Sensorless control of IPM motors in the low-speed range and at standstill by HF injection and DFT processing[J].IEEE Transactions on Industry Applications, 2011, 47(1):96-104. | [3] | YOON Y D, SUL S K, MORIMOTO S , et al.High-bandwidth sensorless algorithm for ac machines based on square-wave-type voltage injection[J].IEEE Transactions on Industry Applications High-bandwidth sensorless algorithm for ac machines based on square-wave-type voltage injection[J].IEEE Transactions on Industry Applications, 2011, 47(3):1361-1370. | [4] | GUERRERO J M, LEETMAA M, BRIZ F, et al. Inverter nonlinearityeffectsinhigh-frequencysignal-injection-basedsensorless controlmethods[J]. IEEE Transactions on Industry Applications, 2005,41(2):618-626. | [5] | LIN T C, GONG L M, LIU J M , et al. Investigation of saliency in a switched-flux permanent-magnet machine using high-frequency signal injection[J]. IEEE Transactions on Industrial Electronics, 2014,61(9):5094-5104. | [6] | ODHANO S A, GIANGRANDE P, BOJOI R I , et al. Self-commissioning of interior permanent-magnet synchronous motor drives with high-frequency current injection[J]. IEEE Transactions on Industrial Electronics, 2014,50(5):3295-3303. | [7] | RACA D, GARCIA P, REIGOSA D D , et al. Carrier-signal selection for sensorless control of pm synchronous machines at zero and very low speeds[J]. IEEE Transactions on Industry Applications, 2010,46(1):167-178. | [8] | KIM Sungmin, HA Jung-IK, SUL Seung-Ki . PWM switching frequency signal injection sensorless method in IPMSM[J]. IEEE Transactions on Industry Applications, 2012,8(5):1576-1587. | [9] | 王高林, 杨荣峰, 李刚 , 等. 基于高频信号注入的 IPMSM无位置传感器控制策略[J]. 中国电机工程学报, 2012,27(11):62-68. |
|