单相环形绕组异步电动机的仿真研究

微特电机 ›› 2020, Vol. 48 ›› Issue (9): 22-25.

单相环形绕组异步电动机的仿真研究

SEM AUTDAM, 陈敏祥

浙江大学电气工程学院,杭州 310027

收稿日期:2020-03-30 出版日期:2020-09-28 发布日期:2020-09-21
作者简介:SEM AUTDAM(1994—), 硕士研究生,研究方向为单相异步电动机设计。

Simulation Design of Single Phase Toroidal Winding Induction Motor

SEM Autdam, CHEN Min-xiang

College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China

Received:2020-03-30 Online:2020-09-28 Published:2020-09-21

摘要/Abstract

摘要： 为了改善单相分布式绕组异步电动机绕线工序复杂、绕组槽满率低、绕组端部过长等缺点,研究了单相环形绕组异步电动机的可行性,论述了该电机的结构、设计要点。根据单相环形绕组异步电动机运行原理和结构的特点,利用Maxwell 2D有限元软件,搭建电机模型进行仿真计算,进而对电机的瞬态性能进行仿真模拟,计算出该电机的起动性能和输出功率,并且分析了该电机在额定转速运行时,铁心磁密的分布及饱和情况,为电机设计提供参考。

关键词: 单相异步电动机, 电容运行, 环形绕组, 有限元分析

Abstract: The single phase induction motor with conventional distributed winding has a lot of disadvantages, such as complicated stator winding process, low slot fill factor, and long end-connection length etc. To improve these shortcomings, the possibility of single phase toroidal winding induction motor was studied, moreover the new structure of the motor and main points for designing the motor were also discussed. According to the working principle and the special structure of the single phase toroidal winding induction motor, Maxwell 2D, the finite element method software was used for modeling and simulation. The motor's transient performance, the starting performance, the output power and the efficiency of the motor were evaluated through the simulation model. The distribution and saturation of the iron core magnetic flux during the rated speed were also analyzed, which provides a reference for motor design.

Key words: single phase induction motor, run capacitor, toroidal winding, finite element method

中图分类号:

TM343+.1

SEM AUTDAM, 陈敏祥. 单相环形绕组异步电动机的仿真研究[J]. 微特电机, 2020, 48(9): 22-25.

SEM Autdam, CHEN Min-xiang. Simulation Design of Single Phase Toroidal Winding Induction Motor[J]. Small & Special Electrical Machines, 2020, 48(9): 22-25.

[1]	程献会, 王淑红. 永磁同步电动机调速范围的优化及性能分析[J]. 微特电机, 2021, 49(3): 17-20.
[2]	孙桂林, 赵勇, 蒋佳楠, 袁瑞林, 赵群弼, 宋受俊, 刘卫国. 航空电动反推力装置用永磁同步电机热分析[J]. 微特电机, 2020, 48(9): 13-17.
[3]	吕刚, 杨镜. 初级横向偏移时帽型次级直线感应电动机制动特性分析[J]. 微特电机, 2020, 48(6): 1-4.
[4]	夏林, 于慎波, 窦汝桐, 夏鹏澎. 考虑磁致伸缩效应的永磁同步电机磁-机械耦合模型[J]. 微特电机, 2020, 48(6): 5-8.
[5]	冯号, 黎英, 蔡星全. 新型磁阻电机的结构设计及转矩优化[J]. 微特电机, 2020, 48(3): 17-21.
[6]	肖渊海, 方晓强, 严亮, 王学彬, 张炜卓. 无刷直流力矩电动机轴向随机振动分析[J]. 微特电机, 2020, 48(3): 22-24.
[7]	张林森, 胡平, 唐勇. 对转双转子永磁同步电机的耦合磁场建模与分析[J]. 微特电机, 2020, 48(11): 1-4.
[8]	. 三种充磁方式轴向磁齿轮的磁场和转矩特性比较[J]. 微特电机, 2020, 48(1): 1-5.
[9]	梅柏杉,吴强,李新. 改进型Halbach阵列的永磁同步电机分析与设计[J]. 微特电机, 2019, 47(7): 10-15.
[10]	张志轩,刘雨锋,钟清伟,罗振华. 新型磁通切换机械调磁永磁电机设计分析[J]. 微特电机, 2019, 47(7): 25-29.
[11]	杨震, 丁涛, 郭媛. 绕线式异步电机三维温度场仿真分析[J]. 微特电机, 2019, 47(6): 6-9.
[12]	刘慧博,杨欢. 电动汽车用六相永磁同步容错电机设计[J]. 微特电机, 2019, 47(2): 47-51.
[13]	. 不同转子槽形对感应电机性能影响的对比分析[J]. 微特电机, 2019, 47(11): 15-18.
[14]	. 双三相隔齿绕永磁同步电机容错性能分析[J]. 微特电机, 2019, 47(10): 11-15.
[15]	. 轴向磁通永磁电机转子支架涡流损耗研究[J]. 微特电机, 2019, 47(10): 16-20.